---
title: "Working with Layers | Criora Docs"
description: "How to explore environmental data on the map using Criora's layer panel"
url: "https://criora.com/docs/guides/working-with-layers"
language: "en"
---

# Working with Layers

The Criora map can overlay any of **30 climate and land layers** on top of the base map. This guide explains how to find, toggle, and read them.

## Where to find the layer panel

Open the [map’s Climate view](https://criora.com/?job=climate), or choose **Climate** in the panel at the top left of the map. It lists the layers in eight sections, each named after what a reader comes to ask.

## Sections

| Section | What’s in it |
| --- | --- |
| **Heat and cold** | Hottest and coldest day of the year, hot days and frosty nights, feels-like temperature, temperature by month, warming by 2050 and 2080 |
| **Floods and sea level** | River flood depth, coastal flood depth, sea level rise |
| **Rain and snow** | Rain and snow by month, days of heavy rain, rainfall change by 2050 and 2080, snow cover |
| **Drought and water** | Drought risk, drier or wetter than usual, water stress now and ahead |
| **Wind and storms** | Strongest gust of the year, windy and stormy days |
| **Fire** | Where fires burn, land burned in 2023 |
| **Earthquakes and ground** | Earthquake shaking, sinking land, height above sea level, steep ground |
| **Climate and land** | [Climate zones](https://criora.com/?layer=koppen::climate), land cover, greenness, built-up land, sunshine by month |

Click a section to expand it. Each entry inside is one **layer**: a dataset that can be toggled on the map.

## Layers for specialists

Another 27 layers, such as snow albedo, soil moisture and vapour pressure deficit, take a specialist to read and are not in the panel. They are read through [Criora’s MCP server](https://criora.com/docs/references/api-and-agents). A link that names one still draws it on the map, under **From your link**.

## Toggling a layer

Click a layer name to switch it on. The map renders the layer as a semi-transparent overlay (50% opacity by default) on top of the base map. Click again to hide it.

You can have multiple layers on at once, they stack in the order you enabled them. The panel shows a check next to every active layer so you can see what’s currently visible.

## Choosing what a layer shows

Some layers offer a choice under their legend. Pick one and the map and the legend update at once:

- **A year and an emissions path**, on the projections. Moderate emissions are the IPCC’s SSP2-4.5 (RCP4.5 for flood depth), very high emissions SSP5-8.5 (RCP8.5), low emissions SSP1-2.6 and high emissions SSP3-7.0.
- **A threshold**, on the counts of days: 35 °C for hot days, 50 km/h for windy days, 20 mm for heavy rain.
- **A month**, on the monthly layers: a typical month, or the extreme one at each end of the year.

## Year slider (temporal layers)

Layers backed by time-series data show a **year slider** at the bottom of the map when active. Drag the slider to jump between years. Examples:

- ERA5 monthly climate (covers ~1950 to recent)
- ERA5 extremes (recent decades)
- NDVI (annual composites)
- SLR projections (multiple target years)

If you have multiple temporal layers active at once, the slider applies the chosen year to whichever layer supports it.

## Reading the legend

Every active layer adds a legend strip on the right side of the map. There are two types:

- **Categorical**: a list of named classes with discrete colours (e.g. Aqueduct Water Stress: Low → Extremely High).
- **Gradient**: a continuous colour ramp from min to max with units (e.g. ERA5 temperature in °C, NDVI from 0 to 1).

Higher-risk values typically map to warmer colours (yellow → orange → red) but always read the legend, some layers (like NDVI) reverse this convention because *higher* vegetation is generally *better*.

## Click to inspect

With one or more layers active, **click anywhere on the map**. A popup shows the value of every visible layer at that exact coordinate, along with the layer name and unit. This is the fastest way to compare two locations on the same metric, open the layer, click point A, click point B.

Tip

When inspecting a categorical layer (e.g. Köppen), the popup shows the class name (e.g. “Cfa -
Humid subtropical”) rather than a raw number.

## Sources and licensing

Each layer carries source attribution shown in the layer panel and on the map’s bottom-right corner when active. Full provider, resolution, and licensing details are listed in [Data Sources](https://criora.com/docs/references/data-sources). All layers Criora ships are open or free-to-use under the providers’ terms.

## What layers feed the report

Map layers and risk scores share the same underlying data. When you generate a location report, the platform queries the same datasets shown in the layer panel, so anything you can visualise on the map is also feeding the score on your report.

The relationship is one-way for the user: turning a map layer on or off does **not** change a saved report’s score. To re-score a location, regenerate the report from its detail page.

## Layers vs dispatches

Layers are pre-aggregated, gridded datasets visualised as overlays on the map: climatology, water stress, sea-level-rise projections, and similar. They tell you what the long-term picture looks like.

For live, point-level events (active wildfires, earthquakes, flood alerts) around a specific location, see the dispatch radar on the **Outlook** tab of a report. The dispatch radar is documented separately in [Live Dispatches](https://criora.com/docs/guides/live-dispatches).

## Related

- [How Scoring Works](https://criora.com/docs/methodology/how-scoring-works): what those layer values become in a report
- [Reading a Report](https://criora.com/docs/guides/reading-a-report): turn a location into structured ESG output
- [Live Dispatches](https://criora.com/docs/guides/live-dispatches): near-real-time point events on the Outlook tab
- [Data Sources](https://criora.com/docs/references/data-sources): provider, resolution, and license per layer
